Booster-31 Grain Hopper
Increase the efficiency of your business!
СALL BACK
Efficiency
Modern single-axle hopper for storage and unloading with hydraulically variable track width. The BOOSTER hoppers' single-axle design, large tires, and hydraulic track change provide excellent mobility while reducing fuel consumption and increasing field efficiency.
Features
The telescopic axle adjusts the track width from 3 m to 3.5 m, allowing you to specify the track width needed for a specific operation. This guarantees that the hopper travels on a separate track width than the tractor, reducing soil compaction.
Advantages
No suspension. This is the most dependable approach because there is no suspension and nothing to break. The absence of suspension, along with the changeable track and large tires, ensures the BOOSTER's greatest stability over any obstacles.
Looking for a way to improve your business productivity?
The Grain Hopper BOOSTER does not roll over in uneven fields and has excellent passability even in uneven and wet soils. Single-screw system ensures that crops suffer minimum harm during the reloading procedure. This makes the BOOSTER suitable for handling delicate crops and seeds. The BOOSTER can also be used to reload seeders. The BOOSTER screw head may move both vertically and horizontally. This considerably improves the speed and consistency of filling grain trucks when compared to traditional hoppers.
Download Brochure
Reloading Hopper Booster-31 - modern single-axle hopper for storage and unloading with hydraulically variable track width
Because of the scientifically determined design, the hopper has only one unloading point, resulting in greater reliability and efficiency. This is the best solution that ensures minimal residual load (no more than 5 kg) and greatly simplifies cleaning. The hydraulically folded 520 mm diameter screw provides an unloading rate of up to 11.5 tons per minute.
| Parameter | Value |
|---|---|
| Hopper Volume, m³ | 31 |
| Payload Capacity, kg | 22,800 |
| Hopper Weight, kg | 8,200 |
| Total Weight, kg | 31,000 |
| Tractor Power Requirement, HP | 200–250 |
| Maximum Speed, km/h | 30 |
| Augers diameter, mm | 1,520 |
| Unload Speed, t/min | Up to 11.5 |
| Axles | 1 |
| Unload Height, mm | 4,300 |
| Brake System | Pneumatic drum brakes |
| Tires | 800/65 R32 for low ground pressure |
| Track Width (Adjustable), mm | 3,000–3,490 |
| Transport Dimensions (L×W×H), mm | 8,250 × 2,990 × 3,995 |
Storage hoppers "POWERBANK"
The POWERBANK series storage hoppers are designed to make the harvesting process more efficient, faster and more cost-effective.
The trailer ensures continuous operation of combine harvesters, prompt transportation of grain from the field to vehicles, and during sowing, fast loading of seeders with seeds and fertilizers.
During harvesting, the POWERBANK hopper receives grain from combines (e.g., immediately in the field), transports it to vehicles,
and swiftly packs seeders with seeds and fertilizers.
The height of the hopper’s top loading point ensures easy operation in accordance with all rules for the location of unloading screws on all types of combines. Complete unloading in less than three minutes! This is 30 percent faster than unloading other hoppers.
The body of the POWERBANK-30 has a big hatch mechanism for easy cleaning. This allows you to swiftly clean the hopper of any remaining goods or perform urgent unloading in an emergency. Oversized hatches are handy for working with moist load (such as seeds).
| Parameter | Value |
|---|---|
| Useful volume of the bunker, m³ | 31 |
| The maximum mass of transported bulk material (grain), kg | 26,000 |
| Required power of the tractor, hp | 180-220 |
| Own weight, kg | 7,480 |
| Hopper length, mm | 7,500 |
| Hopper height, mm | 3,400 |
| Hopper width, mm | 3,000 |
| Loading height, mm | 4,200 |
| Height of the traction loop (adjustable), mm | 450-550 |
| Bearing load on the traction loop, kg | 2,000 |
| Productivity of screws, m³/min | 12,3 |
| A weighing system with a thermal printer | optional |
| Suspension type | tandem |
| Wheels with tires standard size | basic 550/60-22.5, optional 650/50-22.5 or 650/50-26.5 |
| Tire pressure, bar | 2,8 |
| Pressure on the field surface kg/cm² | 0,74 |
| The awning system | optional |
| Hatches for quick unloading (at the bottom | 2 |
| Braking system | pneumatic single circuit |
You can also order from us
DL Agro Hydraulic Tractor Crane
This loader crane is marked by unique capacity and reliability and performance in its price range and equipped with a hook for loading and unloading Big-Bags with fertilizers, seeds etc. and it can also lift the basket with various kinds of loads. ...
Tree and Shrub Puller
The puller is intended for clearing the plantations from trees, wooded fields, clearing from tree and shrub sprouts. The equipment allows for digging the shrubs and trees with the diameter of up to 25 cm depending on the wood species and soil type. The puller “Pliers” is a ...